Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Evergreen, CA
Evergreen’s hillside tract homes need gate work that understands how slope, clay soil, and aging openers interact. From drive gates that bind after winter rain to side-yard gates that no longer close for pool safety, this area throws specific problems at homeowners. Our Gate Installation work starts with the lot itself, because a gate hung on shifting hillside posts fails no matter how good the opener is. Call (877) 358-4473. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Evergreen Homes Are Different
Evergreen’s housing stock is mostly single-family tract and semi-custom construction from the 1960s through the 1990s. That means the gates on these properties are now 30 to 60 years old, and the original hardware has lived through decades of hot, dry summers and seasonal rain. Driveway gates here are usually wood or metal swing gates, with a smaller group of rolling gates running older opener units that predate modern safety sensors.
The real difference is the ground. Evergreen’s East San Jose foothills soil is expansive clay, and the lots slope. When winter rain saturates that clay, it swells and shifts hinge posts. When the dry season shrinks it, posts settle back the other direction. A gate that swung freely in October can start dragging on the driveway or failing to latch by spring. Re-plumbing and re-setting posts is as much a part of gate repair in Evergreen as fixing the hardware itself. Pool-safety gates add another layer: California requires self-closing, self-latching hardware on pool enclosures, and on a sloped yard that hardware has to be adjusted more carefully than on flat ground.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Evergreen Services
Two services cover most of what Evergreen homeowners and property managers call about: mechanical gate repair and the electric/automation side that keeps an opener running. Both are handled by the same crew, so a problem found in one area gets fixed without handing the job to another contractor.
Gate Repair in Evergreen
Gate repair in Evergreen usually means a swing gate that drags, a latch that no longer catches, a hinge that has pulled loose from a post, or a rolling gate that jumps its track. On hillside lots, the root cause is often the post, not the hardware. We diagnose the full system, from the hinge to the latch, and set the price before any work begins. Gate Repair in Evergreen covers the mechanical side in detail. Estimates are free, and we can work with your insurer.
Electric Gate Repair in Evergreen
Electric gate repair in Evergreen focuses on the opener, control board, wiring, and safety sensors rather than the moving metal itself. Older openers on 1990s rolling driveway gates run hot in summer and fail in predictable ways. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite, so diagnosis is brand-specific rather than generic. Electric Gate Repair in Evergreen walks through what that involves. A wiring or control-board issue inside an opener can carry line voltage; that work belongs with a trained technician.
Gate Installation in Evergreen
Gate installation in Evergreen is often the better call when a gate has reached the end of its serviceable life on a hillside lot. Homes built between the 1960s and 1990s were fitted with hardware that is now three or more decades old, and the combination of hot summers, seasonal rain, and shifting clay posts means replacement often costs less than repeated repairs. Gate Installation is our primary service: new gate and posts set for the slope, with an opener chosen for the type of gate and how often it cycles. The written estimate sets the final price before any work starts.
Automatic Gate Installation
Signs you need it
You need automatic gate installation when the existing opener is dead, parts are discontinued, or the gate is functional but you want keypad or remote access instead of walking out to open it every time.
What it costs in Evergreen
Typical electric gate installation in the Evergreen area runs from about $4,500 to $8,900, depending on the operator, gate size, and how much post work the slope requires.
How we do it
We set the posts for the gate’s weight and the hillside’s clay soil, hang the gate, mount the operator, run power and safety loops, and test the full cycle including obstruction sensors.
Driveway Gate Installation
Signs you need it
You need driveway gate installation when the existing gate has sagged beyond adjustment, the post has rotted or shifted, or the driveway entrance needs a wider opening than the current gate provides.
What it costs in Evergreen
Typical driveway gate installation in Evergreen ranges from about $3,000 to $7,500, with rolling gates on steeper grades falling toward the upper end of that range.
How we do it
We remove the old gate and hardware, set new posts to proper footing depth, hang the gate square on the slope, and install a latch or opener suited to how the driveway is used.
What Gate Installation Costs in Evergreen
| Item | Typical range in Evergreen |
|---|---|
| Driveway gate installation | $3,000 – $7,500 |
| Electric gate installation | $4,500 – $8,900 |
| Automatic opener installation | $1,500 – $4,200 |
How long does gate installation take in Evergreen?
Most residential gate installations in Evergreen take one to two days. Hillside post work, power runs, and any concrete curing can extend the job. We schedule a free measure first and give a written price before any work starts.
Can you install a gate on a sloped Evergreen driveway?
Yes. Sloped driveways are the norm in Evergreen, so we plan gate travel around the grade, set posts to proper footing depth in clay soil, and choose an opener rated for the gate’s weight. Call (877) 358-4473 for an exact quote. Estimates are free.
Brands We Service in Evergreen
We repair and install LiftMaster, FAAC, Mighty Mule, and Elite systems in Evergreen, plus the other brands across our service area. Because our technicians work across nine operator platforms, they compare system behaviors and isolate failures faster than single-brand or brand-agnostic repair shops. Check our brands for the full list. Brand-matched parts mean fewer return visits.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Evergreen, CA
| Service | Typical range in Evergreen |
|---|---|
| Gate repair (labor) | $195 – $450 |
| Operator replacement | $850 – $2,200 |
| Driveway gate installation | $3,000 – $7,500 |
| Electric gate installation | $4,500 – $8,900 |
| Automatic opener installation | $1,500 – $4,200 |
| Hinge or latch replacement | $175 – $525 |
| Gate post reset | $400 – $1,200 |
| Control board repair | $250 – $600 |
In Evergreen, prices rise when posts have to be dug out of hillside clay and re-set, when the gate is a heavy rolling model, or when new power conduit has to cross a long driveway. The price is quoted and agreed before any work starts, and the written estimate is what you pay.
Neighborhoods We Serve in Evergreen
We cover Evergreen’s residential areas, including the hillside tract and semi-custom neighborhoods where sloped driveways and aging gates are most common. Response time across the Evergreen area is typically fast dispatch from 7am to 7pm, Sunday through Friday, depending on where in the foothills the job sits and what the gate needs.
- Evergreen Foothills
- Silver Creek
- Yerba Buena
- The Village
- Meadows
Service Area – Cities Near Evergreen
In addition to Evergreen, we take gate repair and installation calls from nearby East San Jose communities. We regularly work in East San Jose, CA, Berryessa, CA, Silver Creek Country Club, CA, and Central San Jose, CA. If you are not sure whether we cover your street, call and ask.
Serving Evergreen, CA – Our Local Coverage Area
We serve Evergreen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Evergreen
We answer 24/7 and dispatch technicians Sunday through Friday from 7am to 7pm. Many Evergreen gate repairs are completed the same day, depending on parts and how much hillside post work is involved. Call (877) 358-4473 to get on the schedule.
Most gate repairs and replacements do not need a permit, but a new powered gate can trigger city requirements for safety sensors and setbacks. Ask Evergreen’s building department about your specific project. We can work with your insurer and provide the documentation your HOA, if any, requests.
Yes. We diagnose from the opener to the hinge in the same visit, so a dragging gate and a dead opener are handled by the same crew on the same call. The estimate covers the full scope, and the price is agreed before any work begins.
Gate Repair Blossom Valley serves Evergreen and the surrounding East San Jose foothills. Estimates are free. Call (877) 358-4473. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Evergreen Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Sana Singh"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Hector Reyes"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Dustin Gallagher